Fish finder listings are full of jargon. Most of it boils down to four decisions: what kind of sonar you need, how deep and wide you need to see, how you will mount it, and how big a screen you can live with. Here is what each one means.
Sonar types
- Traditional 2D (including CHIRP): shows what is directly under the boat as arches and bottom lines. CHIRP sends a sweep of frequencies instead of one, which generally separates fish from the bottom and from each other more clearly.
- Down imaging: a narrow, photo-like view straight down. Good for seeing structure such as brush piles and standing timber.
- Side imaging: scans out to both sides of the boat. Useful for finding structure and covering water quickly, but it takes practice to read.
Frequency and cone angle
Higher frequencies (around 200 kHz) give more detail and work well in shallow water. Lower frequencies (around 50 kHz) reach deeper and cover a wider area, with less detail. If you fish both shallow lakes and deep water, look for a unit that offers both.
Transducer and mounting
The transducer does the real work, so check what is included. A transom mount suits most small boats and is the easiest to install. Trolling-motor and in-hull mounts exist for other setups. Kayak and ice anglers should look at portable units that run on small batteries.
Screen size and mapping
Bigger screens are easier to read but cost more, draw more power and need more room. Built-in GPS and lake maps are worth it if you fish unfamiliar water. Confirm that maps for your area are included before you buy.
A quick way to decide
- Small boat or kayak, shallow water: a compact CHIRP unit with a transom or portable transducer.
- Finding structure on lakes: add down imaging.
- Covering big water or scouting new lakes: look at side imaging and built-in mapping.
Before you head out, check conditions with the free fishing forecast on justbiteme.com. More on the Fishing hub.
